Skip to content
ContentLora

    Tip: press / anywhere to search.

    Explainer

    How drinking water is treated

    US water utilities often treat drinking water in a series of steps: coagulation, flocculation, sedimentation, filtration and disinfection.[1] Chemicals bind particles together so they can settle out.[2][3] Filters remove germs, and a disinfectant such as chlorine or chloramine kills what is left.[4][5] A small amount of disinfectant stays in the water to protect it on the way to the tap.[6] The EPA regulates more than 90 contaminants under the Safe Drinking Water Act.[7]

    Editor reviewedUpdated Explainer18 claims · 100% primaryScience, Environment and nature

    There are over 148,000 public water systems in the United States. Those regulated by the US Environmental Protection Agency (EPA) and the states and tribes it delegates to supply drinking water to 90 percent of Americans.[8] This page describes the usual treatment steps, based mainly on guidance from the US Centers for Disease Control and Prevention (CDC).

    Step 1: Coagulation and flocculation

    Coagulation is often the first step. Plant staff add chemicals, commonly specific salts, aluminum or iron, that help bind dirt and other small particles together.[2] In flocculation the water is mixed gently so these particles form larger, heavier clumps called flocs.[3]

    Step 2: Sedimentation and filtration

    Flocs are heavier than water, so they settle to the bottom during sedimentation.[3] The clear water on top then passes through filters made of sand, gravel or charcoal, with pores of different sizes. These remove germs such as parasites, bacteria and viruses, along with dissolved particles. Activated carbon filters also remove bad smells.[4]

    Some utilities go further. Ultrafiltration pushes water through a filter with very small pores. Reverse osmosis is often used when treating recycled water or salt water for drinking.[9]

    Step 3: Disinfection

    Disinfection is often the last step. Plants add one or more chemical disinfectants, commonly chlorine, chloramine or chlorine dioxide, to kill any remaining germs.[5] They make sure a low level of disinfectant is still in the water when it leaves the plant, so it keeps killing germs in the pipes on the way to the tap.[6]

    Chloramines are most commonly formed by adding ammonia to chlorine, and they disinfect for longer as water moves through the pipes. Utilities have used them since the 1930s, and more than one in five Americans drinks water treated with them.[10] Many systems use chlorine as their main disinfectant, but some have switched their secondary disinfectant to chloramines to meet rules on disinfection byproducts.[11]

    Plants can also use ultraviolet light or ozone, either instead of chemicals or alongside them. Unlike a chemical residual, these methods do not keep killing germs as water travels through the pipes.[12]

    Finishing touches and special cases

    After disinfection, plants commonly adjust the water’s pH and add fluoride. The CDC says adjusting the pH improves taste, reduces pipe corrosion and helps disinfectants keep working in the pipes.[13] For the problem of lead pipes, see lead in drinking water.

    Treatment depends on where the water comes from. Water from lakes, rivers and reservoirs typically needs more treatment than groundwater, because it carries more sediment, germs, chemicals and toxins.[14] Some supplies contain specific contaminants, such as nitrates, radionuclides or toxins made by cyanobacteria (blue-green algae), and these need special treatment methods.[15] For one group of hard-to-remove chemicals, see PFAS “forever chemicals”.

    The rules behind the tap

    Congress passed the Safe Drinking Water Act in 1974 and amended it in 1986 and 1996. It authorizes the EPA to set national health-based standards for drinking water. It does not regulate private wells that serve fewer than 25 people.[16] The EPA counts a water system as public if it pipes water for human consumption to at least 15 service connections, or serves an average of at least 25 people for at least 60 days a year. A public system may be publicly or privately owned.[17]

    The EPA has drinking water regulations for more than 90 contaminants. Once a national primary drinking water regulation is in place, public water systems must comply with it.[7] Secondary standards are different. The EPA recommends them but does not require systems to meet them, except that the public must be notified when the fluoride secondary standard is exceeded. States may choose to make secondary standards enforceable.[18]

    Developing in Science & Energy

    Questions readers ask

    What are the main steps in treating drinking water?

    Utilities often use a series of steps that include coagulation, flocculation, sedimentation, filtration and disinfection. The exact steps depend on the quality of the source water.[1][14]

    Why is there chlorine in tap water?

    Plants leave a low level of chemical disinfectant in the water when it leaves the plant, so it keeps killing germs in the pipes between the plant and your tap.[6]

    What are chloramines?

    Chloramines are disinfectants most commonly formed by adding ammonia to chlorine. They give longer-lasting disinfection in pipes, have been used since the 1930s, and treat the water of more than one in five Americans, according to the EPA.[10]

    Does river water need more treatment than well water?

    Usually. The CDC says water from lakes, rivers or reservoirs typically needs more treatment than groundwater, because it contains more sediment, germs, chemicals and toxins.[14]

    Why don't all plants use UV light instead of chlorine?

    UV light and ozone can disinfect water at the plant, but they do not keep killing germs as the water travels through the pipes. Plants may use them instead of, or alongside, chemical disinfectants.[12]

    Who regulates drinking water in the United States?

    The EPA sets national health-based standards under the Safe Drinking Water Act of 1974, and it has regulations for more than 90 contaminants. The act does not cover private wells serving fewer than 25 people.[16][7]

    Sources

    · 18 claims from 2 publishers

    Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.

    1. [1]

      Water utilities often treat drinking water with a series of steps that include coagulation, flocculation, sedimentation, filtration and disinfection. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, overview (retrieved 2026-11-14)
    2. [2]

      Coagulation is often the first treatment step; plant staff add chemicals, commonly specific salts, aluminum or iron, that help bind dirt and other small particles together. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, coagulation (retrieved 2026-11-14)
    3. [3]

      Flocculation gently mixes the water to form larger, heavier particles called flocs, which then settle to the bottom during sedimentation. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, flocculation (retrieved 2026-11-14)
      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, sedimentation (retrieved 2026-11-14)
    4. [4]

      The clear water then passes through filters of sand, gravel or charcoal with different pore sizes, which remove germs such as parasites, bacteria and viruses as well as dissolved particles; activated carbon filters remove bad smells. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, filtration (retrieved 2026-11-14)
      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, filtration (retrieved 2026-11-14)
    5. [5]

      Disinfection is often the last step, using chemical disinfectants such as chlorine, chloramine or chlorine dioxide to kill remaining germs. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, disinfection (retrieved 2026-11-14)
    6. [6]

      Plants leave a low level of chemical disinfectant in the water so it keeps killing germs in the pipes between the plant and the tap. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, disinfection (retrieved 2026-11-14)
    7. [7]

      The EPA has drinking water regulations for more than 90 contaminants, and public water systems must comply once a national primary drinking water regulation is set. confirmedas of 2026-11-14

    8. [8]

      There are over 148,000 public water systems in the United States, and those regulated by the EPA and delegated states and tribes supply drinking water to 90 percent of Americans. confirmedas of 2026-11-14

    9. [9]

      Some utilities use ultrafiltration, a filter with very small pores, and plants often use reverse osmosis when treating recycled water or salt water for drinking. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, filtration (retrieved 2026-11-14)
      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, filtration (retrieved 2026-11-14)
    10. [10]

      Chloramines are disinfectants most commonly formed by adding ammonia to chlorine; they give longer-lasting disinfection in pipes, have been used since the 1930s, and treat the drinking water of more than one in five Americans. confirmedas of 2026-11-14

      • Chloramines in Drinking Water · US Environmental Protection Agency · Primary source · Chloramines in Drinking Water, overview (retrieved 2026-11-14)
      • Chloramines in Drinking Water · US Environmental Protection Agency · Primary source · Chloramines in Drinking Water, overview (retrieved 2026-11-14)
      • Chloramines in Drinking Water · US Environmental Protection Agency · Primary source · Chloramines in Drinking Water, overview (retrieved 2026-11-14)
    11. [11]

      Some public water systems switched their secondary disinfectant from chlorine to chloramines to meet disinfection byproduct requirements. confirmedas of 2026-11-14

      • Chloramines in Drinking Water · US Environmental Protection Agency · Primary source · Chloramines in Drinking Water, overview (retrieved 2026-11-14)
    12. [12]

      Plants can also disinfect with ultraviolet light or ozone, instead of or alongside chemicals, but these methods do not keep killing germs as water travels through the pipes. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, disinfection (retrieved 2026-11-14)
      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, disinfection (retrieved 2026-11-14)
    13. [13]

      After disinfection, plants commonly adjust the water's pH, which improves taste, reduces pipe corrosion and helps disinfectants keep working in the pipes, and add fluoride. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, after disinfection (retrieved 2026-11-14)
    14. [14]

      Utilities use different treatment steps depending on source water quality; water from lakes, rivers or reservoirs typically needs more treatment than groundwater because it contains more sediment, germs, chemicals and toxins. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, key points (retrieved 2026-11-14)
      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, differences in treatment (retrieved 2026-11-14)
    15. [15]

      Some water supplies contain specific chemicals or toxins, such as nitrates, radionuclides or toxins made by cyanobacteria, that require special treatment methods. confirmedas of 2026-11-14

      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, differences in treatment (retrieved 2026-11-14)
      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, differences in treatment (list) (retrieved 2026-11-14)
      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, differences in treatment (list) (retrieved 2026-11-14)
      • How Water Treatment Works · US Centers for Disease Control and Prevention · Primary source · How Water Treatment Works, differences in treatment (list) (retrieved 2026-11-14)
    16. [16]

      The Safe Drinking Water Act, passed in 1974 and amended in 1986 and 1996, authorizes the EPA to set national health-based drinking water standards; it does not regulate private wells serving fewer than 25 people. confirmedas of 2026-11-14

    17. [17]

      In the United States a public water system is one that pipes water for human consumption to at least 15 service connections or serves an average of at least 25 people for at least 60 days a year; it may be publicly or privately owned. confirmedas of 2026-11-14

    18. [18]

      The EPA recommends secondary drinking water standards but does not require systems to comply with them, except for public notice when the fluoride secondary standard is exceeded; states may make them enforceable. confirmedas of 2026-11-14

    Revision history (1)
    1. Page created.

    Created Nov 14, 2026. Last reviewed by an editor on Nov 14, 2026. Next scheduled review: May 14, 2027.

    Cite this page

    "How drinking water is treated." ContentLora, updated Nov 14, 2026. https://contentlora.com/explain/how-drinking-water-is-treated

    Spotted an error? Suggest a correction or emailcorrections@contentlora.com.