Skip to content
ContentLora

    Tip: press / anywhere to search.

    Explainer

    How wholesale electricity markets work

    In much of North America, independent grid operators called RTOs run wholesale markets where generators offer power and utilities buy it, using day-ahead and real-time auctions.[1][2] The last generator needed to meet demand sets the clearing price, and every cheaper generator is paid that same price.[3] Prices also vary by location because transmission limits stop the cheapest power reaching everywhere, and separate capacity markets pay plants to be available, as in PJM's 2027/2028 auction, which cleared at its price cap.[4][5]

    Editor reviewedUpdated Explainer15 claims · 100% primaryEnergy and climate
    Reading level: 1 passage differs; the rest is the same for everyone.

    This explainer covers who runs wholesale electricity markets, how energy prices are set, why they vary by location, and the capacity and reserve markets that sit alongside them. It uses ISO New England’s published explanations, with PJM and California as examples. Retail bills are covered in the electricity prices explainer.

    Who runs the market

    Ten regional transmission organizations (RTOs), independent non-profit membership bodies, run bulk power systems across much of North America and optimise generators’ and buyers’ bids for wholesale power. Elsewhere, individual utilities or holding companies run the system.[1] RTOs grew out of a 1990s FERC policy of encouraging competitive generation by requiring open access to transmission, and by 2009 they managed 60% of the power supplied to US load-serving entities.[6]

    In a wholesale market, power plants sell energy and utilities or retail suppliers buy it to resell to homes and businesses. Participants can also trade through bilateral contracts outside the organised market.[7] The California ISO, for example, manages high-voltage transmission, runs day-ahead and real-time markets and oversees transmission planning.[8] Two large operators, PJM and ERCOT, have their own pages.

    Day-ahead and real-time markets

    There are two main markets. The day before, buyers and sellers commit to how much power they will buy or sell. On the day itself, a real-time market fixes the differences between what was planned and what actually happens.[2]

    Day-ahead commitments are made one day before the operating day; the real-time market balances the differences between them and actual demand and production.[2] RTOs feed day-ahead and real-time bids from generators and load-serving entities into security-constrained optimisation software and publish prices for thousands of locations at intervals as short as five minutes.[9]

    How the price is set

    Generators submit offers, and the operator’s software picks the least-cost combination that meets demand within the grid’s security limits.[9] The last generator needed is “marginal”: the clearing price just covers its incremental cost. Every cheaper generator is paid the same clearing price and earns more than its own incremental costs.[3] How fuel and other costs reach consumers is covered in electricity prices explained.

    Locational marginal prices

    Locational marginal pricing sets wholesale prices that reflect the value of energy at each point on the grid, given load, generation and transmission limits. ISO New England calculates prices every five minutes at more than 1,000 pricing nodes.[10] If the grid had no transmission limits or losses, every node would have the same price. Prices differ because constraints stop the next-cheapest megawatt from reaching every location.[4]

    Each locational price has three components: energy, congestion and losses, each measured against a load-weighted reference price.[11] Financial transmission rights let participants hedge the congestion component.[12] For how transmission is planned and connected, see transmission and interconnection explained.

    Capacity and reserve markets

    Alongside energy markets, operators such as ISO New England run capacity markets, which pay resources to be available to meet projected demand, and pay for services such as regulation, which adjusts output moment by moment to keep grid frequency very close to 60 hertz.[13]

    PJM’s auction for the 2027/2028 delivery year, announced on 17 December 2025, secured 134,479 MW for more than 67 million people in 13 states and DC. It cleared at the FERC-approved cap of $333.44 per MW-day and fell 6,623 MW short of PJM’s reliability requirement.[5] PJM notes that capacity is only a fraction of wholesale electricity costs, alongside the daily cost of power and transmission.[14] For demand from data centres, see AI data centres and power.

    The West also has a real-time market that crosses utility borders: the Western Energy Imbalance Market, launched in 2014 and run by the California ISO, finds low-cost energy across participating western utilities.[15]

    Read next: how the power grid works, for the physical system these markets dispatch.

    See how the power grid works and electricity prices explained.

    ERCOT (Electric Reliability Council of Texas)

    ERCOT runs the Texas power grid for 27 million customers. Why it stands apart from other US grids, its fuel mix, the 2021 freeze and the data centre queue.

    More in Energy and climate

    Developing in Science & Energy

    Go deeper

    Questions readers ask

    Who runs US wholesale electricity markets?

    In much of the country, regional transmission organizations, which are independent non-profit membership bodies. Elsewhere, individual utilities run their own systems.[1]

    What is the difference between the day-ahead and real-time markets?

    In the day-ahead market, participants commit to buy or sell power for the next day. The real-time market settles the differences between those commitments and actual demand and output.[2]

    Why does every generator get the same price?

    In a uniform-price auction the last generator needed sets the price, and cheaper generators receive the same price, earning more than their incremental costs.[3]

    What is a locational marginal price?

    A wholesale price that reflects the value of energy at a specific place on the grid, given transmission limits. It has energy, congestion and loss components.[10][11]

    Why do prices differ between locations?

    Without transmission limits or losses, every location would have the same price. Constraints stop the next-cheapest megawatt from reaching everywhere, so prices diverge.[4]

    What is a capacity market?

    A market that pays power plants and other resources to be available to meet projected demand. PJM's auction for 2027/2028 secured 134,479 MW at its $333.44/MW-day cap, short of its reliability requirement.[13][5]

    Does the wholesale price set my electricity bill?

    Only partly. Utilities buy wholesale power and resell it to retail customers, and PJM notes that capacity is only a fraction of wholesale costs alongside the daily cost of power and transmission.[7][14]

    Sources

    · 15 claims from 5 publishers

    Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.

    1. [1]

      Ten regional transmission organizations, independent non-profit membership bodies, run bulk power systems across much of North America and optimise generators' and buyers' bids for wholesale power; elsewhere, individual utilities run the system. confirmedas of 2026-11-07

    2. [2]

      Organised markets run a day-ahead market, where participants commit to buy or sell power for the next day, and a real-time market that settles differences between those commitments and actual demand and output. confirmedas of 2026-11-07

    3. [3]

      In a uniform-price auction the last generator needed sets the clearing price, and cheaper generators receive the same price, earning more than their incremental costs. confirmedas of 2023-06-01

    4. [4]

      With no transmission limits or losses every location would have the same price; prices differ because constraints stop the next-cheapest megawatt from reaching every location. confirmedas of 2026-11-07

    5. [5]

      PJM's capacity auction for the 2027/2028 delivery year, announced on 17 December 2025, secured 134,479 MW for more than 67 million people in 13 states and DC at the FERC-approved cap of $333.44/MW-day, 6,623 MW short of its reliability requirement. confirmedas of 2025-12-17

    6. [6]

      RTOs developed in the 1990s to accommodate FERC's policy of encouraging competitive generation by requiring open access to transmission; by 2009 they managed 60% of the power supplied to US load-serving entities. confirmedas of 2026-11-07

    7. [7]

      In a wholesale market, power plants sell energy and utilities or suppliers buy it to resell to retail customers; participants can also trade through bilateral contracts outside the organised markets. confirmedas of 2026-11-07

      • Administering Markets · ISO New England · Primary source · Section on energy markets (retrieved 2026-11-07)
      • Administering Markets · ISO New England · Primary source · Section on energy markets (retrieved 2026-11-07)
    8. [8]

      The California ISO manages high-voltage transmission, runs a competitive wholesale market with day-ahead and real-time markets, and oversees transmission planning. confirmedas of 2026-11-07

      • About us · California Independent System Operator · Primary source · Overview (retrieved 2026-11-07)
      • About us · California Independent System Operator · Primary source · What we do (retrieved 2026-11-07)
    9. [9]

      RTOs dispatch power by feeding day-ahead and real-time bids into optimisation software that selects the least-cost commitment and dispatch within grid security limits, and publish prices for thousands of locations at intervals as short as five minutes. confirmedas of 2026-11-07

    10. [10]

      Locational marginal pricing sets wholesale prices that reflect the value of energy at each location, given load, generation and transmission limits; ISO New England calculates prices every five minutes at more than 1,000 pricing nodes. confirmedas of 2026-11-07

    11. [11]

      A locational marginal price has three parts, an energy component, a congestion component and a loss component, each measured against a load-weighted reference price. confirmedas of 2026-11-07

    12. [12]

      Financial transmission rights let market participants hedge the cost of transmission congestion. confirmedas of 2026-11-07

      • Administering Markets · ISO New England · Primary source · Section on financial transmission rights (retrieved 2026-11-07)
    13. [13]

      Besides energy, ISO New England runs a capacity market that pays resources to be available for projected demand, and pays for services such as regulation, which adjusts output moment by moment to keep grid frequency very close to 60 hertz. confirmedas of 2026-11-07

      • Administering Markets · ISO New England · Primary source · Section on the capacity market (retrieved 2026-11-07)
      • Administering Markets · ISO New England · Primary source · Section on regulation (retrieved 2026-11-07)
      • Administering Markets · ISO New England · Primary source · Section on regulation (retrieved 2026-11-07)
    14. [14]

      PJM notes that capacity is only a fraction of wholesale electricity costs, alongside the daily cost of power and transmission maintenance and expansion. confirmedas of 2025-12-17

    15. [15]

      The Western Energy Imbalance Market, launched in 2014 and run by the California ISO, is a real-time market that finds low-cost energy across utilities in the western US. confirmedas of 2026-11-07

    Revision history (1)
    1. Page created.

    Created Nov 7, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: Feb 7, 2027.

    Cite this page

    "How wholesale electricity markets work." ContentLora, updated Nov 7, 2026. https://contentlora.com/explain/how-electricity-markets-work

    Spotted an error? Suggest a correction or emailcorrections@contentlora.com.