Skip to content
ContentLora

    Tip: press / anywhere to search.

    Explainer

    How DNA sequencing works and what it costs

    DNA sequencing determines the order of the four bases that make up a DNA molecule.[1] Because current methods cannot read a whole genome end to end, DNA is broken into pieces, each base is read many times over, and the reads are assembled by computer.[2][3] NHGRI estimates a draft human genome cost about $14 million in 2006 and below $1,500 by late 2015, and said in 2022 that short-read sequencing cost only a few hundred dollars.[4][5]

    Editor reviewedUpdated Explainer20 claims · 100% primaryLife sciences, Gene editing and gene therapy

    DNA sequencing determines the order of the four chemical building blocks, called bases, in a DNA molecule. That order tells scientists what genetic information a stretch of DNA carries.[1] A single reference copy of the human genome is about 3 billion bases; an individual’s diploid genome, with one set of chromosomes from each parent, is about 6 billion.[6]

    This page explains the technology and its costs. It is not medical advice about genetic testing.

    The basic idea

    In the DNA double helix, adenine always pairs with thymine and cytosine with guanine. This pairing underlies most sequencing methods.[7]

    Current methods cannot read a genome end to end in one step. Instead, DNA is broken into smaller pieces, each piece is sequenced into a “read”, and the reads, often billions of them, are assembled by computer, usually with help from a reference genome.[2]

    Quality depends on how many times each base is read on average, known as coverage. NHGRI’s cost figures assume 30-fold coverage for short-read platforms with reads of 75 to 150 bases, compared with 6-fold for Sanger sequencing, which reads 500 to 600 bases at a time.[3] Accuracy is scored on the Phred scale: a quality score of 20 (Q20) means a 1% chance that a base call is wrong, and is a community standard for a high-quality base.[8]

    Not every project reads the whole genome. Whole-exome sequencing reads only the protein-coding exons, about 1.5% of the genome. It is cheaper than whole-genome sequencing, but not proportionally so, because capturing the exons needs extra lab work.[9]

    Three generations of technology

    Sanger sequencing. Frederick Sanger and Walter Gilbert shared half of the 1980 Nobel Prize in Chemistry for their contributions to determining the base sequences of nucleic acids.[10] Sanger-based sequencing was the main method in NHGRI’s sequencing centres until January 2008.[11]

    Short reads (“next-generation” sequencing). From January 2008 the centres moved to second-generation, or next-generation, sequencing, and costs began falling far faster than Moore’s Law.[11] These short-read technologies read several hundred bases at a time, but short reads alone still leave gaps in assembled genomes.[5]

    Long reads. Two long-read technologies emerged in the decade before 2022. NHGRI says Oxford Nanopore sequencing can read up to 1 million DNA letters in a single read with modest accuracy, while PacBio HiFi reads about 20,000 letters with nearly perfect accuracy.[12] Nanopore sequencing threads single DNA strands through tiny pores in a membrane and identifies each base by its effect on the electrical current through the pore.[13] Another approach films DNA polymerase molecules copying DNA with a fast camera and microscope, using a different coloured dye for each of the four bases.[14]

    From the Human Genome Project to a complete genome

    The Human Genome Project ran from October 1990 to April 2003 and produced the first sequence of the human genome.[15] It left about 8% unmapped.[16] In March 2022 the Telomere-to-Telomere consortium published the first complete, gapless human genome sequence, using both Oxford Nanopore and PacBio HiFi long reads.[16] Most of the new sequence lay in repetitive regions near the ends (telomeres) and centres (centromeres) of chromosomes, and the complete reference revealed more than 2 million additional variants.[17]

    What a genome costs

    YearEstimated cost of a human genome (NHGRI)
    1990–2003About $500 million to $1 billion for the first sequence
    2006About $14 million (high-quality draft)
    Mid-2015Just above $4,000
    Late 2015Below $1,500
    2022A few hundred dollars (short reads)

    The first sequence cost an estimated $500 million to $1 billion. That is separate from total US Human Genome Project funding of about $2.7 billion, which paid for many other activities.[18] NHGRI’s figures from its funded centres put a high-quality draft genome at about $14 million in 2006, just above $4,000 in mid-2015 and below $1,500 by late 2015.[4] By 2022, NHGRI said short-read sequencing of a human genome cost only a few hundred dollars.[5]

    These numbers need care. NHGRI cautions that costs are hard to compare because groups count different items, and that a quoted price can be higher or lower than the actual cost.[19]

    What sequencing is used for

    Sequence data let scientists find which stretches of DNA contain genes or regulatory instructions, and can highlight changes in a gene that may cause disease.[20] Reading DNA is the counterpart of writing it (how DNA synthesis works) and editing it (how CRISPR works).

    You've reached the end of the course. Next crash course

    Developing in Health

    Go deeper

    Questions readers ask

    How big is the human genome?

    A single reference copy is about 3 billion bases. An individual's diploid genome, with one set of chromosomes from each parent, is about 6 billion bases.[6]

    How much does it cost to sequence a human genome?

    NHGRI said in 2022 that sequencing a human genome with short-read technologies cost only a few hundred dollars. It also cautions that groups count different items and that a quoted price can be higher or lower than the actual cost.[5][19]

    What is the difference between whole-genome and whole-exome sequencing?

    Whole-exome sequencing reads only the protein-coding exons, about 1.5% of the genome. It is cheaper than whole-genome sequencing, though not proportionally so because capturing the exons needs extra lab work.[9]

    What does 30x coverage mean?

    That each base is read about 30 times on average. Sequence quality depends on that average, and NHGRI's cost figures assume 30-fold coverage for short-read platforms.[3]

    What is the difference between short-read and long-read sequencing?

    Short-read technologies read several hundred bases at a time and leave some gaps in assembled genomes. Long-read technologies read far more; NHGRI says Oxford Nanopore can read up to 1 million letters in one read with modest accuracy, and PacBio HiFi about 20,000 with nearly perfect accuracy.[5][12]

    Is the human genome now completely sequenced?

    A complete sequence of one human genome now exists. In March 2022 the Telomere-to-Telomere consortium published the first complete, gapless human genome sequence, adding the roughly 8% the Human Genome Project had left unmapped.[16]

    Sources

    · 20 claims from 2 publishers

    Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.

    1. [1]

      DNA sequencing determines the order of the four chemical building blocks, called bases, that make up a DNA molecule, which tells scientists what genetic information a stretch of DNA carries. confirmedas of 2026-11-08

      • DNA Sequencing Fact Sheet · National Human Genome Research Institute · Primary source · What is DNA sequencing? (retrieved 2026-11-08)
    2. [2]

      Current methods cannot read a genome end to end in one step, so DNA is broken into smaller pieces, each piece is sequenced into a "read", and the reads, often billions of them, are assembled computationally, usually with help from a reference genome. confirmedas of 2021-11-01

    3. [3]

      Sequence quality depends on how many times each base is read on average (coverage); NHGRI's cost figures assume 30-fold coverage for short-read Illumina-type platforms with reads of 75 to 150 bases, compared with 6-fold for Sanger sequencing with reads of 500 to 600 bases. confirmedas of 2026-11-08

    4. [4]

      Based on its funded sequencing centres, NHGRI estimated a high-quality draft human genome cost about $14 million in 2006, just above $4,000 in mid-2015 and below $1,500 by late 2015. confirmedas of 2021-11-01

    5. [5]

      In 2022 NHGRI said sequencing a human genome with short-read technologies, which read several hundred bases at a time, cost only a few hundred dollars, but short reads alone still leave gaps in assembled genomes. confirmedas of 2022-03-31

    6. [6]

      A single reference copy of the human genome is about 3 billion bases, while an individual's diploid genome, with one set of chromosomes from each parent, is about 6 billion bases. confirmedas of 2021-11-01

    7. [7]

      In the DNA double helix, adenine always pairs with thymine and cytosine with guanine, and this pairing underlies most DNA sequencing methods. confirmedas of 2026-11-08

      • DNA Sequencing Fact Sheet · National Human Genome Research Institute · Primary source · What is DNA sequencing? (retrieved 2026-11-08)
    8. [8]

      A Phred quality score of 20 (Q20) represents a 1% probability that a base call is wrong and is a community standard for a high-quality base. confirmedas of 2026-11-08

    9. [9]

      Whole-exome sequencing reads only the protein-coding exons, about 1.5% of the human genome, and is cheaper than whole-genome sequencing, though not proportionally so because capturing exons needs extra lab work. confirmedas of 2021-11-01

    10. [10]

      Frederick Sanger and Walter Gilbert shared half of the 1980 Nobel Prize in Chemistry for their contributions to determining the base sequences of nucleic acids. confirmedas of 1980-12-10

    11. [11]

      NHGRI's cost data show costs falling far faster than Moore's Law from January 2008, when its sequencing centres moved from Sanger-based to second-generation (next-generation) sequencing. confirmedas of 2026-11-08

    12. [12]

      Two long-read technologies emerged in the decade before 2022; NHGRI says Oxford Nanopore sequencing can read up to 1 million DNA letters in one read with modest accuracy, while PacBio HiFi reads about 20,000 letters with nearly perfect accuracy. confirmedas of 2022-03-31

    13. [13]

      Nanopore sequencing threads single DNA strands through tiny pores in a membrane and identifies each base by its effect on the electrical current flowing through the pore. confirmedas of 2026-11-08

      • DNA Sequencing Fact Sheet · National Human Genome Research Institute · Primary source · Are newer sequencing technologies under development? (retrieved 2026-11-08)
      • DNA Sequencing Fact Sheet · National Human Genome Research Institute · Primary source · Are newer sequencing technologies under development? (retrieved 2026-11-08)
    14. [14]

      Another approach watches DNA polymerase molecules copying DNA with a fast camera and microscope, using a different coloured dye for each of the four bases. confirmedas of 2026-11-08

      • DNA Sequencing Fact Sheet · National Human Genome Research Institute · Primary source · Are newer sequencing technologies under development? (retrieved 2026-11-08)
    15. [15]

      The Human Genome Project ran from October 1990 to April 2003 and produced the first sequence of the human genome. confirmedas of 2026-11-08

      • The Human Genome Project · National Human Genome Research Institute · Primary source · Introduction (retrieved 2026-11-08)
    16. [16]

      In March 2022 the Telomere-to-Telomere consortium published the first complete, gapless human genome sequence, adding the roughly 8% the Human Genome Project had left unmapped, using both Oxford Nanopore and PacBio HiFi long reads. confirmedas of 2022-03-31

    17. [17]

      Most of the newly added sequence lay in repetitive regions near chromosome ends (telomeres) and centres (centromeres), and the complete reference revealed more than 2 million additional variants. confirmedas of 2022-03-31

    18. [18]

      NHGRI estimates that generating the first human genome sequence cost between about $500 million and $1 billion, separate from total US Human Genome Project funding of about $2.7 billion, which covered many other activities. confirmedas of 2021-11-01

    19. [19]

      NHGRI cautions that genome sequencing costs are hard to compare because groups count different items, and that a quoted price can be higher or lower than the actual cost. confirmedas of 2021-11-01

    20. [20]

      Sequence data let scientists find which stretches of DNA contain genes or regulatory instructions and can highlight changes in a gene that may cause disease. confirmedas of 2026-11-08

      • DNA Sequencing Fact Sheet · National Human Genome Research Institute · Primary source · What is DNA sequencing? (retrieved 2026-11-08)
      • DNA Sequencing Fact Sheet · National Human Genome Research Institute · Primary source · What is DNA sequencing? (retrieved 2026-11-08)
    Revision history (1)
    1. Page created.

    Created Nov 8, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: Feb 8, 2027.

    Cite this page

    "How DNA sequencing works and what it costs." ContentLora, updated Nov 8, 2026. https://contentlora.com/explain/how-genome-sequencing-works

    Spotted an error? Suggest a correction or emailcorrections@contentlora.com.