Skip to content
ContentLora

    Tip: press / anywhere to search.

    Explainer

    How atomic clocks keep time

    An atomic clock tunes light or microwaves to the natural resonant frequency of an atom and counts the cycles; since 1967 the second has been defined as 9,192,631,770 cycles at the cesium resonance.[1][2] Atoms make good pendulums because all atoms of a type are identical, unlike manufactured oscillators that differ and drift.[3] Cesium fountain clocks realize the official second today, optical clocks are now about 100 times better, and about 450 clocks in some 90 labs feed the BIPM's calculation of Coordinated Universal Time (UTC).[4][5][6]

    Editor reviewedUpdated Explainer29 claims · 100% primaryPhysics, Science

    Two parts: something that ticks, something that counts

    NIST describes every clock as a pairing of two parts: something that oscillates with a steady beat, and a device that counts the beats and displays the time.[7] Pendulums and quartz crystals are manufactured, so no two are quite the same and they drift. All atoms of a given type, by contrast, are identical.[3]

    An atomic clock uses the atom as its pendulum. It tunes light toward the atom’s resonant frequency, measures how many atoms absorb energy to tell when it has reached the resonance, then counts the crests and troughs of that light and converts the count into ticks.[1] In 1967 the world’s timekeepers defined the international second as the time taken by 9,192,631,770 cycles of radiation tuned to the cesium resonance.[2] That number is not a fundamental constant of nature. It comes from a 1958 measurement that matched cesium cycles to a second derived from the US Naval Observatory’s observations of the Moon.[8] How that definition fits into the wider metric system is covered in how the SI units are defined.

    Beam clocks: the first generation

    The first atomic clock was built in 1949 at the National Bureau of Standards (now NIST) in Washington, D.C., and was hardly better than the electronic clocks of the day.[9] Beam clocks shoot hot cesium atoms down a tube through microwaves. A detector counts the atoms that changed energy state, and the count is used to tune the microwave frequency to the atomic resonance.[10]

    Their limits come from speed. Hot atoms cross the beam at hundreds of metres per second, leaving little time to probe them, and their motion shifts the frequency through the Doppler effect.[11] Even so, the first commercial atomic clock went on sale in 1956 for $50,000, and stock exchanges, telecom networks and data centres still rely on commercial beam clocks.[12]

    Fountain clocks: today’s primary standards

    Cesium fountain clocks are the most accurate and stable operational clocks and are the ones used to realize the official SI second. NIST’s NIST-F4 is one of fewer than 20 such fountains worldwide.[4] NIST says the best would have gained or lost less than a second if they had run since the time of the dinosaurs. They cannot reliably run day in, day out, however.[13]

    Optical clocks: the next generation

    Optical clocks use visible light instead of microwaves. A visible light wave packs about 100,000 times more oscillations into a second, so it divides the second far more finely.[14] They became practical after the frequency comb was invented in 1999, which converts optical frequencies into microwave frequencies that electronics can count.[15] Aluminum, strontium and ytterbium have emerged as the best-performing atoms.[16]

    There are two main designs. Trapped-ion clocks tune a laser to a single charged atom, while optical lattice clocks measure thousands of atoms at once, held in a web of laser light, and are the most precise and stable clocks in existence.[17] NIST says the best optical clocks are now 100 times more accurate and stable than cesium fountains.[5] Portable, dishwasher-sized lattice clocks have been carried up skyscrapers and across the US, and iodine optical clocks are planned for Europe’s Galileo navigation satellites.[18] Further out, a nuclear clock based on an energy transition in the thorium nucleus would use ultraviolet light, but NIST says no one has yet built one.[19]

    The CGPM noted in 2026 that the best optical frequency standards surpass the accuracy of the current caesium definition by a factor of up to 100, and it has asked for a proposal for a new definition of the second by 2030.[20][21]

    From many clocks to one world time

    No single clock keeps official time. Nations began jointly producing Coordinated Universal Time (UTC) in 1960, and the BIPM has overseen it since the 1980s.[22] About 90 laboratories send data from around 450 clocks to the BIPM. It weights each clock by its stability, averages them, calibrates the result with fountain and optical clocks, and each month tells every national lab how far its time is from UTC.[6]

    In the US, NIST’s ensemble in Boulder, Colorado, combines about a dozen very stable hydrogen masers with about half a dozen commercial cesium beam clocks, which are more accurate but less stable.[23] The US Naval Observatory runs more than 100 masers, beam clocks and rubidium fountains and is the largest single contributor to international time; NIST and the observatory have agreed to keep their time scales within 20 nanoseconds of each other.[24]

    UTC is kept close to Earth’s rotation by occasional leap seconds, a practice the world’s timekeepers have now voted to end; see leap seconds explained.[25][26]

    How the time reaches you

    NIST broadcasts time by radio, including the 60 kHz WWVB signal from Fort Collins, Colorado, that radio-controlled clocks pick up, and its internet time servers receive more than a million requests a second.[27] Phones get regular time updates from cell towers. Each tower’s GPS receiver picks up signals from GPS satellites carrying several rubidium atomic clocks, which are corrected from the ground by the US Naval Observatory.[28]

    Next in the crash course

    More in Physics

    Questions readers ask

    How does an atomic clock work?

    It tunes light toward an atom's resonant frequency, uses the number of atoms that absorb energy to tell when it has hit the resonance, and then counts the cycles of that light to mark time.[1]

    Why is the second defined by cesium?

    In 1967 the world's timekeepers defined the second as 9,192,631,770 cycles of radiation tuned to the cesium resonance. That number came from a 1958 measurement matching cesium cycles to an astronomical second; it is not a fundamental constant.[2][8]

    How accurate are atomic clocks?

    NIST says the best fountain clocks would have gained or lost less than a second since the time of the dinosaurs, and that today's best atomic clocks would have drifted by less than a second since the Big Bang.[13][29]

    What is an optical clock?

    A clock that uses visible light, which oscillates about 100,000 times faster than the microwaves in cesium clocks. NIST says the best optical clocks are now 100 times more accurate and stable than cesium fountains.[14][5]

    Does my phone use an atomic clock?

    Indirectly. Phones take time updates from cell towers whose GPS receivers pick up signals from GPS satellites, each carrying several rubidium atomic clocks corrected from the ground by the US Naval Observatory.[28]

    Who decides the official world time?

    The BIPM. About 90 labs send data from around 450 clocks; the BIPM weights and averages them, calibrates the result with fountain and optical clocks, and tells each lab every month how far its time is from UTC.[6]

    Sources

    · 29 claims from 2 publishers

    Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.

    1. [1]

      An atomic clock tunes light toward an atom's resonant frequency, detects how many atoms absorb energy to find the resonance, then counts the cycles of that light to mark time. confirmedas of 2026-11-08

    2. [2]

      In 1967 the world's timekeepers defined the international second as 9,192,631,770 cycles of radiation tuned to the cesium resonant frequency. confirmedas of 2026-11-08

    3. [3]

      Manufactured oscillators such as pendulums and quartz crystals differ from one another and drift, whereas all atoms of a given type are identical. confirmedas of 2026-11-08

    4. [4]

      Cesium fountain clocks are the most accurate and stable operational clocks and are used to realize the SI second; NIST's NIST-F4 is one of fewer than 20 such clocks worldwide. confirmedas of 2026-11-08

    5. [5]

      NIST says the best optical clocks are now 100 times more accurate and stable than cesium fountain clocks. confirmedas of 2026-11-08

    6. [6]

      About 90 laboratories send data from around 450 clocks to the BIPM, which weights each clock by its stability, averages them, calibrates the result with fountain and optical clocks, and tells each lab monthly how far its time is from UTC. confirmedas of 2026-11-08

    7. [7]

      NIST describes every clock as two components - something that oscillates with a steady beat and a device that counts the beats and displays the time. confirmedas of 2026-11-08

    8. [8]

      The number 9,192,631,770 is not a fundamental constant; it comes from a 1958 measurement that matched cesium cycles to a second derived from astronomical observations of the Moon by the US Naval Observatory. confirmedas of 2026-11-08

    9. [9]

      The first atomic clock was built in 1949 at the National Bureau of Standards (now NIST) in Washington, D.C., and was hardly better than existing electronic clocks. confirmedas of 2026-11-08

    10. [10]

      Beam clocks send hot cesium atoms down a tube through microwaves; a detector counts atoms that changed energy state and the count is used to tune the microwave frequency to the atomic resonance. confirmedas of 2026-11-08

    11. [11]

      Beam clocks are limited because their hot atoms move at hundreds of metres per second, leaving little time to probe the resonance, and because motion shifts the frequency through the Doppler effect. confirmedas of 2026-11-08

    12. [12]

      The first commercial atomic clock, the Atomichron, went on sale in 1956 for $50,000, and commercial cesium beam clocks are still used by national labs, stock exchanges, telecom networks and data centres. confirmedas of 2026-11-08

    13. [13]

      NIST says the best fountain clocks would have gained or lost less than a second if they had run since the time of the dinosaurs, but they cannot reliably run continuously. confirmedas of 2026-11-08

    14. [14]

      Optical clocks use visible-light transitions, which oscillate about 100,000 times faster than the microwaves used in cesium clocks and so divide the second more finely. confirmedas of 2026-11-08

    15. [15]

      Optical clocks became practical after the frequency comb was invented in 1999; it converts optical frequencies into microwave frequencies that electronics can count. confirmedas of 2026-11-08

    16. [16]

      Aluminum, strontium and ytterbium have emerged as the best-performing atoms for optical clocks. confirmedas of 2026-11-08

    17. [17]

      Trapped-ion clocks probe a single charged atom, while optical lattice clocks measure thousands of atoms held in a web of laser light at once and are the most precise and stable clocks in existence. confirmedas of 2026-11-08

    18. [18]

      Portable, dishwasher-sized lattice clocks have been moved up skyscrapers and across the US, and iodine-based optical clocks are planned for Europe's Galileo navigation satellites. confirmedas of 2026-11-08

    19. [19]

      A nuclear clock based on an energy transition in the thorium nucleus would use ultraviolet light, but as of NIST's description no one has yet built one. confirmedas of 2026-11-08

    20. [20]

      The CGPM noted in 2026 that the best optical frequency standards surpass the accuracy achievable with the current caesium definition of the second by a factor of up to 100. confirmedas of 2026-11-08

    21. [21]

      At its 28th meeting in 2026 the CGPM asked the International Committee for Weights and Measures to work towards a proposal for a new definition of the second to be presented at its 29th meeting in 2030, noting that no consensus had yet been reached on which atomic species to use. confirmedas of 2026-11-08

    22. [22]

      Nations began jointly producing Coordinated Universal Time (UTC) in 1960, and the BIPM has overseen it since the 1980s. confirmedas of 2026-11-08

    23. [23]

      US civilian time is kept by NIST's ensemble in Boulder, Colorado, of about a dozen hydrogen masers, which are very stable, and about half a dozen commercial cesium beam clocks, which are more accurate. confirmedas of 2026-11-08

    24. [24]

      The US Naval Observatory runs more than 100 masers, beam clocks and rubidium fountain clocks and is the largest single contributor to international time; NIST and USNO have agreed to keep their time scales within 20 nanoseconds. confirmedas of 2026-11-08

    25. [25]

      A leap second is an extra second occasionally added to UTC to keep it within 0.9 seconds of UT1, the astronomical time scale that varies with Earth's rotation. confirmedas of 2026-11-08

    26. [26]

      At its 28th meeting in 2026 the CGPM decided that continuous UTC will take effect on 20 May 2027 and that the maximum difference between UT1 and UTC will be 3,600 seconds (one hour), which it said ensures UTC's continuity for several centuries. confirmedas of 2026-11-08

    27. [27]

      NIST distributes time by radio, including the 60 kHz WWVB signal from Fort Collins, Colorado, used by radio-controlled clocks, and through internet time servers that receive more than a million requests per second. confirmedas of 2026-11-08

    28. [28]

      Phones get regular time updates from cell towers whose GPS receivers pick up signals from GPS satellites, each carrying several rubidium atomic clocks that are corrected from the ground by the US Naval Observatory. confirmedas of 2026-11-08

    29. [29]

      NIST says today's best atomic clocks would have gained or lost less than a second if they had been running since the Big Bang 13.8 billion years ago. confirmedas of 2026-11-08

    Revision history (1)
    1. Page created.

    Created Nov 8, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: May 8, 2027.

    Cite this page

    "How atomic clocks keep time." ContentLora, updated Nov 8, 2026. https://contentlora.com/explain/how-atomic-clocks-work

    Spotted an error? Suggest a correction or emailcorrections@contentlora.com.