Skip to content
ContentLora

    Tip: press / anywhere to search.

    Explainer

    Leap seconds and the decision to end them

    A leap second is an extra second occasionally added to Coordinated Universal Time (UTC) to keep it within 0.9 seconds of UT1, the time scale that follows Earth's rotation. Atomic time (TAI) is now 37 seconds ahead of UTC.[1][2] Because leap seconds create time jumps that risk malfunctions in navigation, telecom and energy systems, the General Conference on Weights and Measures (CGPM) decided in 2022 to loosen the rule by 2035.[3] In 2026 it set the details: continuous UTC takes effect on 20 May 2027, and UTC may drift up to one hour from Earth-rotation time.[4]

    Editor reviewedUpdated Explainer17 claims · 100% primaryScience, Computing

    Two kinds of time

    Modern timekeeping runs on two clocks that disagree slightly. International Atomic Time (TAI) is built from atomic clocks (see how atomic clocks work). UT1 follows Earth’s rotation, which changes slightly over time.[1] Coordinated Universal Time (UTC) is based on TAI but adjusted by leap seconds to account for the difference between the atomic second and Earth’s rotation.[2] The CGPM describes UTC as the only recommended time scale for international reference and the basis of civil time in most countries.[5]

    The mismatch has a history. The atomic second was calibrated against astronomical observations in 1958. Since then Earth’s rotation has slowed and days have grown slightly longer, so leap seconds have been added since 1972 to keep atomic time in step with the Sun and stars.[6]

    How leap seconds work

    A leap second is an extra second occasionally added to UTC to keep it within 0.9 seconds of UT1.[1] The first was inserted on 30 June 1972, and every one so far has been positive, adding a second.[7] TAI is now 37 seconds ahead of UTC, a difference unchanged since 1 January 2017.[2]

    The decision is made by the International Earth Rotation and Reference Systems Service (IERS). It issues Bulletin C every six months, and leap seconds can be added at the end of June or December. Bulletin C 72, issued in July 2026, said there would be no leap second at the end of December 2026.[8]

    Why they became a problem

    In 2022 the CGPM said these discontinuities risk serious malfunctions in critical digital infrastructure, including satellite navigation, telecommunications and energy transmission.[3] It also noted that network and satellite-navigation operators had each developed their own ways of applying leap seconds that follow no agreed standard.[9] Its 2026 resolution added that service providers’ different methods of avoiding the time step leave systems out of step with each other, and warned that delay could push some organizations to use satellite-navigation time instead of UTC.[10]

    A new risk has also appeared. NIST says Earth’s rotation has started to speed up, raising the possibility that timekeepers would need to subtract a second for the first time.[11] The CGPM noted in 2022 that a negative leap second had never been foreseen or tested.[12] Its 2026 resolution cited a 2025 workshop estimate that the probability of a negative leap second would reach 30% by 2035. It said preparing for one could cost industry about as much as preparing for the millennium bug.[13]

    The decisions: 2022 and 2026

    2022. In November 2022 the CGPM decided that the maximum allowed difference between UT1 and UTC would be increased in or before 2035.[3] The International Telecommunication Union’s World Radiocommunication Conference endorsed that decision in Resolution 655 (WRC-23), which set a transition period allowing radio systems to disseminate the larger UT1-UTC difference until 2035, but no later than 2040, where existing equipment cannot be replaced earlier.[14]

    2026. At its 28th meeting in 2026 the CGPM set the details. Continuous UTC will take effect on 20 May 2027, and the maximum difference between UT1 and UTC will be 3,600 seconds (one hour), which it said ensures UTC’s continuity for several centuries.[4]

    DateEvent
    30 June 1972First leap second inserted[7]
    1 January 2017TAI-UTC reaches 37 seconds, the current value[2]
    November 2022CGPM decides to raise the UT1-UTC limit by 2035[3]
    July 2026IERS Bulletin C 72: no leap second at end of 2026[8]
    2026CGPM sets continuous UTC from 20 May 2027 with a one-hour limit[4]

    What it means for clocks and people

    For everyday life the drift will be slow. The CGPM pointed out that time zones already put civil time more than an hour away from local solar time in many countries, and changes of an hour are regularly made where daylight-saving time is used.[15] Astronomers and others who need Earth-rotation time can still get the UT1-UTC difference from satellite-navigation messages and from IERS and national metrology institute services. NIST’s radio stations broadcast a correction called DUT1.[16]

    A separate change is coming to the second itself: the CGPM has asked for a proposal for a new definition of the second by 2030, though it noted no consensus yet on which atoms to use. See how the SI units are defined.[17]

    Next in the crash course

    Radioactivity and half-life explained

    What radioactivity is, how alpha, beta and gamma decay differ, what a half-life measures, and why some isotopes last seconds and others billions of years.

    Developing in Science & Energy

    Go deeper

    Questions readers ask

    What is a leap second?

    An extra second occasionally added to UTC so that it stays within 0.9 seconds of UT1, the astronomical time scale that follows Earth's slightly variable rotation.[1]

    When was the last leap second?

    NIST's table of inserted leap seconds lists 31 December 2016 as the most recent, and the 37-second offset between atomic time (TAI) and UTC has been unchanged since 1 January 2017. IERS Bulletin C 72 confirmed that none will be added at the end of December 2026.[2][8]

    Are leap seconds being abolished?

    Effectively, yes. In 2026 the CGPM decided that continuous UTC will take effect on 20 May 2027 and that UT1 and UTC may differ by up to 3,600 seconds, which it said ensures UTC's continuity for several centuries.[4]

    Why are leap seconds a problem?

    The CGPM says the time steps risk serious malfunctions in satellite navigation, telecommunications and energy systems, and that operators use different, non-standard methods to handle them, which leaves systems out of step with each other.[3][9][10]

    What is a negative leap second?

    Removing a second instead of adding one. It has never happened. Earth's rotation has recently sped up, and a 2025 workshop estimate cited by the CGPM put the probability of one at 30% by 2035.[7][11][13]

    Will clocks drift away from the Sun?

    Only slowly. The CGPM noted that time zones already put civil time more than an hour from local solar time in many countries, and users who need Earth-rotation time can still get the UT1-UTC difference from satellite-navigation messages and IERS and national lab services.[15][16]

    Sources

    · 17 claims from 3 publishers

    Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.

    1. [1]

      A leap second is an extra second occasionally added to UTC to keep it within 0.9 seconds of UT1, the astronomical time scale that varies with Earth's rotation. confirmedas of 2026-11-08

    2. [2]

      UTC is based on International Atomic Time (TAI) adjusted by leap seconds, and TAI is currently 37 seconds ahead of UTC, a difference unchanged since 1 January 2017; NIST's table of inserted leap seconds lists 31 December 2016 as the most recent. confirmedas of 2026-11-08

    3. [3]

      In November 2022 the CGPM decided that the maximum allowed difference between UT1 and UTC would be increased in or before 2035, citing risks to satellite navigation, telecommunications and energy systems from leap-second discontinuities. confirmedas of 2026-11-08

    4. [4]

      At its 28th meeting in 2026 the CGPM decided that continuous UTC will take effect on 20 May 2027 and that the maximum difference between UT1 and UTC will be 3,600 seconds (one hour), which it said ensures UTC's continuity for several centuries. confirmedas of 2026-11-08

    5. [5]

      The CGPM describes UTC as the only recommended time scale for international reference and the basis of civil time in most countries. confirmedas of 2026-11-08

    6. [6]

      The atomic second was calibrated in 1958; since then Earth's rotation has slowed and days have lengthened, so leap seconds have been added since 1972 to keep atomic time in step with the Sun and stars. confirmedas of 2026-11-08

    7. [7]

      The first leap second was inserted on 30 June 1972, and every leap second so far has been positive, adding a second. confirmedas of 2026-11-08

    8. [8]

      The IERS announces leap seconds in Bulletin C every six months; they can be added at the end of June or December, and Bulletin C 72 (July 2026) said there would be no leap second at the end of December 2026. confirmedas of 2026-11-08

    9. [9]

      The 2022 resolution noted that network and satellite-navigation operators had developed their own methods of applying leap seconds that follow no agreed standard. confirmedas of 2026-11-08

    10. [10]

      The 2026 resolution said service providers' differing methods of avoiding leap-second time steps cause timing inconsistencies between systems, and that delay could push some users to adopt satellite-navigation time instead of UTC. confirmedas of 2026-11-08

    11. [11]

      NIST says Earth's rotation has started to speed up in recent years, raising the possibility that timekeepers would need to subtract a second for the first time. confirmedas of 2026-11-08

    12. [12]

      The CGPM noted in 2022 that Earth-rotation observations pointed to a possible first negative leap second, which had never been foreseen or tested. confirmedas of 2026-11-08

    13. [13]

      The 2026 resolution cited a 2025 CCTF and IERS workshop estimate that the probability of a negative leap second would reach 30% by 2035, and said preparing for one could cost industry about as much as preparing for the millennium bug. confirmedas of 2026-11-08

    14. [14]

      The International Telecommunication Union's World Radiocommunication Conference endorsed the 2022 CGPM decision in Resolution 655 (WRC-23), which set a transition period allowing radio systems to disseminate the larger UT1-UTC difference until 2035, but no later than 2040, where existing equipment cannot be replaced earlier. confirmedas of 2026-11-08

    15. [15]

      The CGPM pointed out that time zones already put civil time more than an hour away from local solar time in many countries, and daylight-saving time shifts clocks by an hour. confirmedas of 2026-11-08

    16. [16]

      Users who need Earth-rotation time (UT1) can get the UT1-UTC difference from satellite-navigation messages and from internet services of the IERS and national metrology institutes; NIST's radio stations also broadcast a correction called DUT1. confirmedas of 2026-11-08

    17. [17]

      At its 28th meeting in 2026 the CGPM asked the International Committee for Weights and Measures to work towards a proposal for a new definition of the second to be presented at its 29th meeting in 2030, noting that no consensus had yet been reached on which atomic species to use. confirmedas of 2026-11-08

    Revision history (2)
    1. Sourced the date of the last leap second to NIST's table instead of inferring it.
    2. Page created.

    Created Nov 8, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: Jun 8, 2027.

    Cite this page

    "Leap seconds and the decision to end them." ContentLora, updated Nov 14, 2026. https://contentlora.com/explain/leap-seconds-explained

    Spotted an error? Suggest a correction or emailcorrections@contentlora.com.