Explainer
How fibre broadband works: PON, GPON and XGS-PON
Fibre-optic cables, including the submarine cables that link continents, carry data as laser light sent down thin glass fibres.[1] The ITU's GPON standard describes a passive optical network: an optical line termination at the provider serves many customer units through a tree of fibres and passive splitters, in a one-to-many arrangement.[2] The ITU's GPON standard runs at 2.4 Gbit/s downstream, and its XGS-PON standard at 10 Gbit/s in both directions, with capacity shared among the homes on each splitter.[3][4][5]
This explainer describes how fibre access networks are designed, using the ITU standards. Speeds are the nominal line rates in those standards, not what any provider sells; check a provider’s own terms for plan speeds.
Light in glass
Fibre-optic cables, such as the ones that link continents across the seabed, carry data as laser light inside very thin strands of glass, wrapped in plastic and sometimes steel wire for protection.[1] Fibre access networks bring optical fibre to a street cabinet, a building or all the way to the home.[6]
ITU-T’s GPON recommendation (G.984.1) describes a flexible optical fibre access network for business and residential services.[3] It defines GPON systems as an optical line termination (OLT), optical network units or terminals (ONU/ONT), and a passive optical distribution network (ODN) between them, in a one-to-many relationship.[2]
How far the fibre goes: FTTH, FTTB and FTTC
“Fibre broadband” covers several designs. ITU-T describes optical access architectures ranging from fibre to the home (FTTH), through fibre to the building or curb (FTTB/C), to fibre to the cabinet (FTTCab).[6] As the names say, only in FTTH does the fibre run all the way to the home; in the other designs it ends at a building, the curb or a street cabinet.[6]
The passive optical network
In a passive optical network (PON), the provider’s optical line termination connects to customer units through a tree of optical fibres with splitters, filters or other passive optical devices, none of which need power.[2] One OLT serves many ONUs or ONTs.[2]
That sharing involves a trade-off. The GPON standard said split ratios of up to 1:64 were realistic with the technology of 2008 and required the protocol layer to handle up to 1:128; a larger split means more optical splitting and needs a bigger power budget to reach the same distance.[5] GPON defines physical reach options of 10 km and 20 km between the customer unit and the OLT, and a maximum logical reach of 60 km.[7]
GPON and XGS-PON speeds
GPON has nominal line rates of 2.4 Gbit/s downstream and either 1.2 Gbit/s or 2.4 Gbit/s upstream.[3] A later ITU-T standard, XGS-PON (G.9807.1), runs over the same kind of point-to-multipoint infrastructure at a nominal 10 Gbit/s in both directions, and is designed for residential, business and mobile backhaul uses.[4] Because the line rate is shared across the customers on a splitter, these figures are not the speed of a single home’s plan.[2][5]
Fibre and public funding
Fibre has been at the centre of US broadband policy. The federal BEAD programme originally limited its “priority broadband projects” to end-to-end fibre, but a June 2025 overhaul removed that preference.[8] Priority projects must now deliver at least 100 Mbps down and 20 Mbps up with latency of 100 milliseconds or less, and fibre, cable, low Earth orbit satellite and fixed wireless can all qualify.[9][10] See the BEAD explainer for how states chose providers, and satellite internet explained for the main alternative in remote areas.
Read next
Next in the crash course
How Wi-Fi works: 802.11, the 6 GHz band and Wi-Fi 7
How Wi-Fi works: the IEEE 802.11 standards, Wi-Fi generations from Wi-Fi 4 to Wi-Fi 8, the 2.4, 5 and 6 GHz bands, and what Wi-Fi 7 changed.
Questions readers ask
How does fibre carry data?
In fibre-optic cables such as those laid across oceans, lasers send light down thin glass fibres, which are wrapped in plastic, and sometimes steel wire, for protection.[1]
What is a passive optical network (PON)?
It is a fibre network in which an optical line termination (OLT) at the provider connects to optical network units or terminals (ONU/ONT) at customers through a tree of fibres and passive splitters. One OLT serves many customer units.[2]
What is the difference between GPON and XGS-PON?
In the ITU standards, GPON has nominal line rates of 2.4 Gbit/s downstream and 1.2 or 2.4 Gbit/s upstream. XGS-PON runs at a nominal 10 Gbit/s both downstream and upstream.[3][4]
Is fibre bandwidth shared with neighbours?
On a PON, yes. One optical line termination serves many customer units through splitters; the GPON standard considered splits of up to 1:64 realistic in 2008 and requires the protocol to handle up to 1:128.[2][5]
What is the difference between FTTH and FTTC?
ITU-T describes optical access ranging from fibre to the home (FTTH), through fibre to the building or curb, to fibre to the cabinet (FTTCab), where fibre stops at a street cabinet.[6]
How far can a fibre connection reach?
GPON defines physical reach options of 10 km and 20 km between the customer unit and the provider's equipment, and a maximum logical reach of 60 km.[7]
Sources
· 10 claims from 3 publishers
Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.
- [1]
Modern submarine cables are fiber-optic, with lasers sending light down thin glass fibers that are wrapped in plastic and sometimes steel wire for protection. reportedas of 2026-11-07
- Submarine Cable Frequently Asked Questions · TeleGeography · Secondary source · How do cables work? (retrieved 2026-11-07)
- [2]
A passive optical network links an optical line termination (OLT) on the provider's side to optical network units or terminals (ONU/ONT) at customer premises through a passive tree of fibres and splitters, in a one-to-many arrangement. confirmedas of 2008-03-01
- Recommendation ITU-T G.984.1 (03/2008): Gigabit-capable passive optical networks (GPON): General characteristics · ITU-T · Primary source · 2008-03-01 · Section 1, Scope (retrieved 2026-11-07)
- Recommendation ITU-T G.984.1 (03/2008): Gigabit-capable passive optical networks (GPON): General characteristics · ITU-T · Primary source · 2008-03-01 · Section 1, Scope (retrieved 2026-11-07)
- Recommendation ITU-T G.984.1 (03/2008): Gigabit-capable passive optical networks (GPON): General characteristics · ITU-T · Primary source · 2008-03-01 · Section 3.2.6, optical distribution network (retrieved 2026-11-07)
- [3]
The ITU's GPON standard (G.984.1) describes a fibre access network for homes and businesses with nominal line rates of 2.4 Gbit/s downstream and 1.2 or 2.4 Gbit/s upstream. confirmedas of 2008-03-01
- Recommendation ITU-T G.984.1 (03/2008): Gigabit-capable passive optical networks (GPON): General characteristics · ITU-T · Primary source · 2008-03-01 · Summary, p. i (retrieved 2026-11-07)
- [4]
The ITU's XGS-PON standard (G.9807.1) describes a point-to-multipoint fibre system running at a nominal 10 Gbit/s both downstream and upstream, for residential, business, mobile backhaul and other uses. confirmedas of 2023-02-01
- Recommendation ITU-T G.9807.1 (02/2023): 10-Gigabit-capable symmetric passive optical network (XGS-PON) · ITU-T · Primary source · 2023-02-01 · Summary (retrieved 2026-11-07)
- Recommendation ITU-T G.9807.1 (02/2023): 10-Gigabit-capable symmetric passive optical network (XGS-PON) · ITU-T · Primary source · 2023-02-01 · Summary (retrieved 2026-11-07)
- [5]
The GPON standard says split ratios of up to 1:64 were realistic with 2008 technology and that the protocol layer must allow up to 1:128; larger splits need a bigger optical power budget. confirmedas of 2008-03-01
- Recommendation ITU-T G.984.1 (03/2008): Gigabit-capable passive optical networks (GPON): General characteristics · ITU-T · Primary source · 2008-03-01 · Section 12 (retrieved 2026-11-07)
- Recommendation ITU-T G.984.1 (03/2008): Gigabit-capable passive optical networks (GPON): General characteristics · ITU-T · Primary source · 2008-03-01 · Section 12 (retrieved 2026-11-07)
- [6]
ITU-T describes optical access architectures ranging from fibre to the home (FTTH) through fibre to the building or curb (FTTB/C) to fibre to the cabinet (FTTCab). confirmedas of 2008-03-01
- Recommendation ITU-T G.984.1 (03/2008): Gigabit-capable passive optical networks (GPON): General characteristics · ITU-T · Primary source · 2008-03-01 · Section 5.1 (retrieved 2026-11-07)
- [7]
GPON defines physical reach options of 10 km and 20 km between the customer unit and the OLT, and a maximum logical reach of 60 km. confirmedas of 2008-03-01
- Recommendation ITU-T G.984.1 (03/2008): Gigabit-capable passive optical networks (GPON): General characteristics · ITU-T · Primary source · 2008-03-01 · Section 9 (retrieved 2026-11-07)
- Recommendation ITU-T G.984.1 (03/2008): Gigabit-capable passive optical networks (GPON): General characteristics · ITU-T · Primary source · 2008-03-01 · Section 8 (retrieved 2026-11-07)
- [8]
The original BEAD funding notice limited priority broadband projects to end-to-end fiber; the June 2025 notice eliminated the fiber preference and allowed states to select from all qualifying technologies. confirmedas of 2026-11-07
- Broadband Equity, Access, and Deployment (BEAD) Program: BEAD Restructuring Policy Notice · National Telecommunications and Information Administration · Primary source · 2025-06-06 · Section 3 (retrieved 2026-11-07)
- Broadband Equity, Access, and Deployment (BEAD) Program: BEAD Restructuring Policy Notice · National Telecommunications and Information Administration · Primary source · 2025-06-06 · Section 3 (the 34 is a footnote marker) (retrieved 2026-11-07)
- [9]
Under the June 2025 notice, a Priority Broadband Project is one that provides at least 100 Mbps download and 20 Mbps upload, latency of 100 milliseconds or less, and can easily scale speeds over time. confirmedas of 2026-11-07
- Broadband Equity, Access, and Deployment (BEAD) Program: BEAD Restructuring Policy Notice · National Telecommunications and Information Administration · Primary source · 2025-06-06 · Section 3.1 (retrieved 2026-11-07)
- [10]
The June 2025 notice said fiber, cable, low Earth orbit (LEO) satellite and terrestrial fixed wireless may all be used in Priority Broadband Project applications if they meet the technical requirements. confirmedas of 2026-11-07
- Broadband Equity, Access, and Deployment (BEAD) Program: BEAD Restructuring Policy Notice · National Telecommunications and Information Administration · Primary source · 2025-06-06 · Section 3.2 (retrieved 2026-11-07)
Revision history (1)
- Page created.
Created Nov 7, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: May 1, 2027.
Cite this page
"How fibre broadband works: PON, GPON and XGS-PON." ContentLora, updated Nov 7, 2026. https://contentlora.com/explain/how-fiber-broadband-works
Spotted an error? Suggest a correction or emailcorrections@contentlora.com.